Leverantörens produktinformation

• Bleeder Port Size: M10 x 1.5
• Box Part Number: CL-2
• Brake Caliper Finish: Unfinished
• Brake Piston Count: 1
• Canada VIO Count: 541
• Color: Gray
• E-Waste: No
• FAQs: A symptom of a low brake pedal is usually caused by air in the system, misadjusted brakes, worn brake pads, a deteriorated flexible brake hose or a misadjusted Master Cylinder push rod.
• FAQs: As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
• FAQs: Brake squeal is usually caused by vibration. Always make sure the pads are tight on the caliper. Many vehicles required clinching of the tabs to assure a tight fit. Also, make sure the rotors were cut with a non-directional finish and use a anti-squeal compound.
• FAQs: Brakes squeal all of the time. What's causing the squeal?
• FAQs: Check the steering and suspension. Then, inspect both calipers for binding or sticky slides or pins. Check brake lining for oil, grease or uneven wear. Inspect brake hoses for restriction. Check for proper tire pressure.
• FAQs: Could calipers be the cause of a low brake pedal?
• FAQs: My car pulls to one side during braking. Why?
• FAQs: Phenolic pistons do not rust. Phenolic pistons are not affected by heat or moisture in the brake system and they also dampen brake system noise.
• FAQs: What are the advantages of Phenolic pistons over steel?
• FAQs: What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
• Features and Benefits: A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• Features and Benefits: As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Features and Benefits: Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• Features and Benefits: Mounting bracket is included where applicable for a hassle-free installation.
• Features and Benefits: New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• Features and Benefits: New bleeder screws provide trouble-free bleeding and a positive seal.
• Features and Benefits: New stainless steel hardware clips and new mounting pins are included where applicable.
• Features and Benefits: New washers are included where applicable for a proper seal.
• Features and Benefits: Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
• Features and Benefits: Pistons are durable, resistant to cracking or pitting and handle great loads.
• Features and Benefits: Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Inlet Port Size: M10 x 1.5
• Installation Hardware Included: Yes
• Mounting Bolts Included: No
• Package Contents: Caliper, Hardware Kit
• Pads Included: No
• Piston Material: Steel
• Piston Size (OD) (in): 1.88
• Piston Size (OD) (mm): 47.75
• Product Condition: Remanufactured
• Product Line Marketing Stmt: CARDONE Industries, Inc. is the remanufactured parts supplier to the O.E.Ms. We are the only remanufacturer in the world with over 45 years€™ experience in mechanical, hydraulic and electronic parts repair. Through reverse-engineering, our product engineers are able to determine where €“ and why €“ original parts fail. We re-engineer our A1 CARDONE® Reman parts for stronger, longer-lasting performance. We build it better. Learn more at Cardone.com.
• Qty To Pallet: 111