Värmeskydd
86 resultat inom Värmeskydd med 0 aktiva filter.
Värmeskydd
30
13
I lager
Aluminiserat värmeskydd för startmotorer, ett måste när headers ligger nära!
100,00 kr
1
I lager
Delbar. Reflective Line Sleeve 1/2" x 3feet, Delbar med tejpförslutning
370,00 kr
2
I lager
AFW91-2012
Värmestrumpa
1-1/2" (38.1mm) I.D. 3ft (1m) Lång. 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart Isolerar slangar och kablar mot hög temperatur. Tål upp till 260°C. Direktkontakt med värmekä ...Visa Mer
1-1/2" (38.1mm) I.D. 3ft (1m) Lång. 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart
Isolerar slangar och kablar mot hög temperatur. Tål upp till 260°C. Direktkontakt med värmekällan rekommenderas inte!!.
460,00 kr
1
I lager
Upp till Ø1/4". Värmetåligt flätat kabelhölje. Längd 7,6 meter
245,00 kr
1
I lager
Upp till Ø1/2". Värmetåligt flätat kabelhölje. Längd 7,6 meter
495,00 kr
3
I lager
Upp till Ø1". Värmetåligt flätat kabelhölje. Längd 7,6 meter
420,00 kr
2
I lager
Upp till Ø1-1/2". Värmetåligt flätat kabelhölje. Längd 7,6 meter
480,00 kr
1
I lager
HSP270312
Isoleringshylsa
Isoleringshylsa (Thermaflect Sleeve) 5" (127mm) daimeter, 36" (914mm) lång. Max 1100°. Ej Avgassystem Heat Shield, Thermaflect Sleeve, 1,100 Degrees F, 5.00 in. Diameter, 36.0 in. Length, Each
Isoleringshylsa (Thermaflect Sleeve) 5" (127mm) daimeter, 36" (914mm) lång. Max 1100°. Ej Avgassystem
Heat Shield, Thermaflect Sleeve, 1,100 Degrees F, 5.00 in. Diameter, 36.0 in. Length, Each
1 300,00 kr
4
I lager
MOR80805
Värmeisoleringsfilt
457 x 610 x 13mm (18" x 24" x 1/2") - Asbestfri OBS! Keramisk fiber = poröst/luddigt, måste täckas/kläs in annars smular och dammar den. Tål upp till1260ºC
457 x 610 x 13mm (18" x 24" x 1/2") - Asbestfri
OBS! Keramisk fiber = poröst/luddigt, måste täckas/kläs in annars smular och dammar den.Tål upp till1260ºC
730,00 kr
2
I lager
Delbar. Reflective Line Sleeve 1" x 3feet, Delbar med tejpförslutning
420,00 kr
1
I lager
Reflekterande. 914 x 1016mm (36" x 40"). Självhäftande.
1 975,00 kr
2
I lager
Värmehuva för insug på GM LS motorer, självhäftande
630,00 kr
AFW91-2010
Värmestrumpa
1/2" (12.7mm) I.D. 3ft (1m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart Isolerar slangar och kablar mot hög temperatur. Tål upp till 260°C. Direktkonta ...Visa Mer
1/2" (12.7mm) I.D. 3ft (1m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart
Isolerar slangar och kablar mot hög temperatur. Tål upp till 260°C. Direktkontakt med värmekällan rekommenderas inte!!.
175,00 kr
AFW91-2011
Värmestrumpa
1" (25.4mm) I.D. 3ft (1m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart Isolerar slangar och kablar mot hög temperatur. Tål upp till 260°C. Direktkontakt ...Visa Mer
1" (25.4mm) I.D. 3ft (1m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart
Isolerar slangar och kablar mot hög temperatur. Tål upp till 260°C. Direktkontakt med värmekällan rekommenderas inte!!.
280,00 kr
Delbar. Reflective Line Sleeve 3/4" x 3feet, Delbar med tejpförslutning
400,00 kr
AFW91-4005
Värmeskydd
Heat Barrier 6-1/4" x 26" Sheet Adhesive backed Aluminised surface reflects up to 2000°deg;F radiant heat. Aeroflow's adhesive backed barrier has the same high quality features as the flexible heat b ...Visa Mer
Heat Barrier 6-1/4" x 26" Sheet Adhesive backed Aluminised surface reflects up to 2000°deg;F radiant heat.
Aeroflow's adhesive backed barrier has the same high quality features as the flexible heat barrier with the added adhesive back allowing neat and easy installation. Flexible adhesive backed barrier can only be applied one way adhesive side down. Withstands 2000°F / 1100°C radiant heat and 1200°F / 650°C direct heat, can be trimmed to fit then simply peel and stick.
790,00 kr
AFW91-4010
Värmeskydd Guld
Gold Heat Barrier 12" x 12" Sheet Adhesive backed Aluminised surface reflects up to 2000°deg;F radiant heat. Aeroflow's adhesive backed barrier has the same high quality features as the flexible heat ...Visa Mer
Gold Heat Barrier 12" x 12" Sheet Adhesive backed Aluminised surface reflects up to 2000°deg;F radiant heat.
Aeroflow's adhesive backed barrier has the same high quality features as the flexible heat barrier with the added adhesive back allowing neat and easy installation. Flexible adhesive backed barrier can only be applied one way adhesive side down. Withstands 2000°F / 1100°C radiant heat and 1200°F / 650°C direct heat, can be trimmed to fit then simply peel and stick.
230,00 kr
AFW91-4011
Värmeskydd Guld
Gold Heat Barrier 12" x 24" Sheet Adhesive backed Aluminised surface reflects up to 2000°deg;F radiant heat. Aeroflow's adhesive backed barrier has the same high quality features as the flexible heat ...Visa Mer
Gold Heat Barrier 12" x 24" Sheet Adhesive backed Aluminised surface reflects up to 2000°deg;F radiant heat.
Aeroflow's adhesive backed barrier has the same high quality features as the flexible heat barrier with the added adhesive back allowing neat and easy installation. Flexible adhesive backed barrier can only be applied one way adhesive side down. Withstands 2000°F / 1100°C radiant heat and 1200°F / 650°C direct heat, can be trimmed to fit then simply peel and stick.
365,00 kr
AFW91-7049
Kabelskydd
Flex Braid Wrap 1/8" (3.1mm) I.D. 1 Meter Length Black Finish, Tight Weave High Coverage Aeroflow’s heat-flex braid is lightweight and extremely flexible. Made of PET (Polyethylene Terephthalat ...Visa Mer
Flex Braid Wrap 1/8" (3.1mm) I.D. 1 Meter Length Black Finish, Tight Weave High Coverage
Aeroflow’s heat-flex braid is lightweight and extremely flexible. Made of PET (Polyethylene Terephthalate) this heat-flex braid can be used for insulating wire bundles or cables while offering that factory look. Heat-flex braid can also be used on heater and radiator hoses. With a tough woven construction, heat-flex provides a continuous temperature rating of up to 127°C (260°F) and a melting temperature of 250°C (482°F). It is recommended for a tight fit choose a braid wrap diameter that is a smaller size than required for your application. For a more flexible/loose fit select a braid wrap diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move. If the braided wrap is not cut correctly it can fray. To prevent fraying use a hot cutting tool such as a hot knife or a soldering iron with a sharp tip. Slice the braid using even pressure to leave an evenly sealed edge on the braid. While the end is cooling you can flare it using a small cone-shaped object to hold it open. Once the braid wrap is cut to size simply push and slide the sleeve into place over the cable and finish it off with either heat shrink or Aeroflow hose end finishers for that professional look.
40,00 kr
AFW91-7549
Kabelskydd
Flex Braid Wrap 1/8" (3.1mm) I.D. 7.6 Meter Length Black Finish, Tight Weave High Coverage Aeroflow’s heat-flex braid is lightweight and extremely flexible. Made of PET (Polyethylene Terephthal ...Visa Mer
Flex Braid Wrap 1/8" (3.1mm) I.D. 7.6 Meter Length Black Finish, Tight Weave High Coverage
Aeroflow’s heat-flex braid is lightweight and extremely flexible. Made of PET (Polyethylene Terephthalate) this heat-flex braid can be used for insulating wire bundles or cables while offering that factory look. Heat-flex braid can also be used on heater and radiator hoses. With a tough woven construction, heat-flex provides a continuous temperature rating of up to 127°C (260°F) and a melting temperature of 250°C (482°F). It is recommended for a tight fit choose a braid wrap diameter that is a smaller size than required for your application. For a more flexible/loose fit select a braid wrap diameter that is the same size or slightly larger than your application, this will ensure that the cables are able to smoothly and easily move. If the braided wrap is not cut correctly it can fray. To prevent fraying use a hot cutting tool such as a hot knife or a soldering iron with a sharp tip. Slice the braid using even pressure to leave an evenly sealed edge on the braid. While the end is cooling you can flare it using a small cone-shaped object to hold it open. Once the braid wrap is cut to size simply push and slide the sleeve into place over the cable and finish it off with either heat shrink or Aeroflow hose end finishers for that professional look.
230,00 kr
AFW91-8095
Värmeskydd Bromsbehållare
Titanium Clutch / Brake Reservoir Heat Protector Bag Suits 2" Diameter Reservoirs 200mm Long and 90mm (3") High Aeroflow Performance have created this clutch/ brake reservoir heat protector bag as a ...Visa Mer
Titanium Clutch / Brake Reservoir Heat Protector Bag Suits 2" Diameter Reservoirs 200mm Long and 90mm (3") High
Aeroflow Performance have created this clutch/ brake reservoir heat protector bag as a safety shield for your Brake or clutch reservoir in the hot engine bay. This is important to protect the internal fluid on these reservoirs because when heated up outside of operating temperatures it changes density and does not perform as intended or last as last as intended. This bag provides insulation protection of up 1370 Degree Celsius (2500F) more than enough to keep these systems running at optimal conditions. Available in either a Titanium finish or Carbon finish and sold individually with two diameter sizes of either 2" (50.8mm) or 3" (76.2mm).
415,00 kr
AFW91-8096
Värmeskydd Bromsbehållare
Titanium Clutch / Brake Reservoir Heat Protector Bag Suits 3" Diameter Reservoirs 330mm Long and 90mm (3") High Aeroflow Performance have created this clutch/ brake reservoir heat protector bag as a ...Visa Mer
Titanium Clutch / Brake Reservoir Heat Protector Bag Suits 3" Diameter Reservoirs 330mm Long and 90mm (3") High
Aeroflow Performance have created this clutch/ brake reservoir heat protector bag as a safety shield for your Brake or clutch reservoir in the hot engine bay. This is important to protect the internal fluid on these reservoirs because when heated up outside of operating temperatures it changes density and does not perform as intended or last as last as intended. This bag provides insulation protection of up 1370 Degree Celsius (2500F) more than enough to keep these systems running at optimal conditions. Available in either a Titanium finish or Carbon finish and sold individually with two diameter sizes of either 2" (50.8mm) or 3" (76.2mm).
570,00 kr
AFW91-8895
Värmeskydd Bromsbehållare
Carbon Clutch / Brake Reservoir Heat Protector Bag Suits 2" Diameter Reservoirs 200mm Long and 90mm (3") High Aeroflow Performance have created this clutch/ brake reservoir heat protector bag as a sa ...Visa Mer
Carbon Clutch / Brake Reservoir Heat Protector Bag Suits 2" Diameter Reservoirs 200mm Long and 90mm (3") High
Aeroflow Performance have created this clutch/ brake reservoir heat protector bag as a safety shield for your Brake or clutch reservoir in the hot engine bay. This is important to protect the internal fluid on these reservoirs because when heated up outside of operating temperatures it changes density and does not perform as intended or last as last as intended. This bag provides insulation protection of up 1370 Degree Celsius (2500F) more than enough to keep these systems running at optimal conditions. Available in either a Titanium finish or Carbon finish and sold individually with two diameter sizes of either 2" (50.8mm) or 3" (76.2mm).
470,00 kr
AFW91-8896
Värmeskydd Bromsbehållare
Carbon Clutch / Brake Reservoir Heat Protector Bag Suits 3" Diameter Reservoirs 330mm Long and 90mm (3") High Aeroflow Performance have created this clutch/ brake reservoir heat protector bag as a sa ...Visa Mer
Carbon Clutch / Brake Reservoir Heat Protector Bag Suits 3" Diameter Reservoirs 330mm Long and 90mm (3") High
Aeroflow Performance have created this clutch/ brake reservoir heat protector bag as a safety shield for your Brake or clutch reservoir in the hot engine bay. This is important to protect the internal fluid on these reservoirs because when heated up outside of operating temperatures it changes density and does not perform as intended or last as last as intended. This bag provides insulation protection of up 1370 Degree Celsius (2500F) more than enough to keep these systems running at optimal conditions. Available in either a Titanium finish or Carbon finish and sold individually with two diameter sizes of either 2" (50.8mm) or 3" (76.2mm).
675,00 kr
HOKBHS519
Värmeskydd
Heat Shield; Starter Heat Shield; For Use w/GM LT Engine Swap Exhaust Manifolds;
Heat Shield; Starter Heat Shield; For Use w/GM LT Engine Swap Exhaust Manifolds;
560,00 kr
MRG3678
Värmeskydd
Värmesköld till startmotor Chevrolet Small Block, Big Block och 90° V6 Byggd med värmetålig isolering mellan 2 aluminiumplåtar.
Värmesköld till startmotor Chevrolet Small Block, Big Block och 90° V6
Byggd med värmetålig isolering mellan 2 aluminiumplåtar.
700,00 kr
AFW91-1909
Värmestrumpa
5/16" (7.93mm) I.D. 3ft (1m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart
5/16" (7.93mm) I.D. 3ft (1m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart
115,00 kr
AFW91-1999
Värmestrumpa
5/16" (7.93mm) I.D. 12ft (3.7m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart
5/16" (7.93mm) I.D. 12ft (3.7m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart
355,00 kr
AFW91-2000
Värmestrumpa
1/2" (12.7mm) I.D. 12ft (3.7m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart
1/2" (12.7mm) I.D. 12ft (3.7m) Lång. Klarar upp till 2000°F / 1100°C strålande värme och 500°F / 260°C direktvärme - Svart
570,00 kr