Fönsterhisskontakt
Standard Motors : DWS2140
Artikelnr: STMDWS2140
- LB5Z14529AB:
- PA5032:
- SW8445:
- WST2240:
Beställningsvara.
Leveranstid mer än 2 månader. EXPRESSLEVERANS 1 till 3 veckor.
EXPRESSLEVERANS -Väljs i kassan
260,00 kr
Inkl. Moms
Recensioner
Nyligen besökta produkter
HML07-CC-24V188
Kamaxel set
Street and Towing Kit, Mechanical Flat Tappet, 188 Int./220 Exh., 1.030 in. Springs, Heavy-Duty Pushrods, Dodge, Cummins, 24V, Kit Whats included: 188/220 Camshaft (fits 89-2018 Cummins) Heavy d ...Visa Mer
Street and Towing Kit, Mechanical Flat Tappet, 188 Int./220 Exh., 1.030 in. Springs, Heavy-Duty Pushrods, Dodge, Cummins, 24V, Kit
Whats included:188/220 Camshaft (fits 89-2018 Cummins)Heavy duty pushrods (oem-3000 hp)103 Valve SpringsLifters/tappetsInformation:RPM Range: 1700-4500Drops EGT 200-300Increased Mid Range powerDuration at .050" of lift 188 Intake, 220 ExhaustValve springs are meant to prevent valve float and improve overall performanceHeavy duty pushrods prevents loss in valve lift or retarded timingModification Required: On a 24 valve engines, you will need .018" or less piston protrusion and at least .038" valve face depth with a standard gasket. If you do not meet the minimum requirements for piston to valve clearance, dont worry, you can still run an oversize head gasket or cut valve reliefs. Applications:works great on 24v applications with 66mm or smaller charger for low rpm or with large singles at higher rpm.moderate singles, or set of compounds on 24v engines except vp-44 trucks, you will need a 178-208Weekend warriorDrag stripStock class pulling Break in:To make sure that you have no issues during break-in, follow these few suggestions.Make sure that the cam has a Liberal amount of quality assembly lube appliedDO NOT let the engine start without oil pressureWhen this is a new engine, be sure to put a liberal amount of assembly lube in the oil pump and prime the oil filterBe sure to change the oil after you have done your break-in procedure. When the filter and oil system are already primed, engine will get oil pressure much faster than if the oil is changed at the same time.Disconnect the fuel system and spin the engine with the starter until oil pressure can be read or until oil is coming out of the rocker arms.Do not let the starter run for more than 10 seconds at a timeOnce oil pressure has been verified, let the engine start and run for five minutes at 1200-1500rpm then shut engine downAdjust valves then you are cleared to abuse your engine. Enjoy the added airflowif you need to re-torque or hot-torque the head, do so before adjusting valves. Re-torqueing the head changes the valve lash setting, so it is important to set lash last.
27 140,00 kr
Supreme-serien, förbättrad OE-ersättning
295,00 kr
MEVCMK8722T
Bärarm
Supreme-serien, förbättrad OE-ersättning, förstärkt design för ökad styrka och hållbarhet, smörjbar, monteringssats ingår
Supreme-serien, förbättrad OE-ersättning, förstärkt design för ökad styrka och hållbarhet, smörjbar, monteringssats ingår
1 765,00 kr
Mått: 126,7 x 48 x 16,5mm
1 315,00 kr
Panel hjulhus vänster bak 62x23 uttag bensin
3 095,00 kr
