Cardone : 215390

Artikelnr: cdo215390
CADILLAC TRUCK SRX 2004-2009 V8-279 4.6L DOHC
  • Box Part Number: WM-5
  • Canada VIO Count: 952
  • Cardone Pop Code: W
  • E-Waste: No
  • FAQs: A whining pump is usually caused by air in the system. Remove reservoir lid and inspect fluid level and condition. If fluid has foam or air bubbles present, you must bleed the system again. Some systems are very difficult to bleed manually and may require the use of a vacuum pump to extract all of the air from the system.
  • FAQs: I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
  • FAQs: I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
  • FAQs: Should I ever change my fluid, even though nothing is wrong?
  • FAQs: The problem is not in the pump, it is in the steering gear. The pump would cause a steering problem in both directions.
  • FAQs: The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
  • FAQs: There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
  • FAQs: Why do I still have hard steering in one direction after I replaced the pump?
  • FAQs: Why is the pump making a whining noise all of the time?
  • FAQs: Yes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
  • Features and Benefits: All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
  • Features and Benefits: All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
  • Features and Benefits: As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Features and Benefits: FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
  • Features and Benefits: Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
  • Features and Benefits: Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
  • Features and Benefits: Units are supplied with 100% tested and calibrated pressure relief valves.
  • Hose Port Type: O-Ring
  • Housing Material: Aluminum
  • Mounting Hardware Included: No
  • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
  • Power Steering Outlet ID Size: 0
  • Power Steering Outlet Thread Size: 18x1.5
  • Power Steering Pump Inlet Attachement Type: Hose barb
  • Power Steering Pump Outlet Attachment Type: Threaded
  • Power Steering Pump Outlet Quantity: 1
  • Power Steering Reservoir Cap Included: No
  • Product Condition: Remanufactured
  • Product Line Marketing Stmt: After 50 years of leadership in the automotive aftermarket, we are excited to start the next chapter of CARDONE's dynamic history. We are positioned to support the next wave of vehicle technology and ready to innovate new solutions that bring value to our customers - all while upholding sustainable business practices and high ethical principles. We build it better.
  • Pulley Attachement Type: Press-On
  • Pulley Included: No
  • Qty To Pallet: 168
  • Remote Reservoir: Yes
  • Reservoir Included: No
  • 25754248: Cadillac
  • 25754248: General Motors
  • 25754248: GM
  • 25770742: Cadillac
  • 25770742: General Motors
  • 25770742: GM
2 I lager